Holz Rubber Company’s 320EZ™ Rubber Expansion Joint Solves Potential Vibration, Noise, Shock, Corrosion, Motion & Stress Problems
Holz Rubber Company’s 320 EZ™ Rubber Expansion Joint has the lowest forces to deflect in the industry making it especially well-suited for applications using plastic pipe.
The Holz 320EZ Rubber Expansion Joint’s unique, lightweight elastomer composition and construction allows it to move very easily, (EZ’), and with less effort than traditional expansion joints, creating lower stresses on flanges and other piping components. Yet, the Holz 320EZ offers higher pressure capabilities to go along with the best flexibility. Holz 320EZ Rubber Expansion Joints provide excellent movements in compression, extension, lateral, angular deflection and torsional.
ACR manufactures expansion joints for highest pressure at the lowest weight.
ACR manufactures and supplies flue and duct joints for all applications and industries.
The Holz 320M Expansion Joint applies the technology of the tire industry to the molded pressure piping expansion joint. The use of polyester tire cord and the modified arch construction provides greater overall performance than previous designs.
Holz Rubber Company’s 320M Molded Expansion Joint is also available in Teflon® lined.
The 530 SUPER SPHERE Expansion Joint can easily replace and interchange with hand built, molded and spherical expansion joints. As a member of the Non-Metallic Expansion Joint Division of the Fluid Sealing Association, Holz designed and manufactures the 530 SUPER SPHERE to combine the advantages of many other types/sizes of expansion joints and for application in HVAC, Chemical, Petrochemical, Marine, Power Plants, Pulp & Paper, Process Piping Systems, Water/Wastewater Treatment and Steel Mill Industries.
ACR supplies Teflon Expansion Joints for high heat and chemical resistance.
Holz Series 1000/2000 Vibration Dampeners are a relief from vibration, noise and stress at pump flanges.
Holz Rubber Vibration Dampeners absorb noise resulting from vibration, prevent noise transmission through the adjoining piping system and minimize the effects of "water hammer".
Holz Rubber Non-Metallic Vibration Dampeners are non-conductive; stop propagation of electrolytic action at any point where they are installed.
Holz Rubber "utilized" construction provides an extra thick elastomeric tube, high-strength polyester fabric and spiralled steel wire reinforcement, and full-faced integral flanged ends.
All Holz Rubber Non-Metallic Vibration Dampeners incorporate the finest materials in combination with painstaking fabrication techniques.
RM-HOLZ Expansion Joint Line Provides Longest Wear Life for Severe Duty Applications in the Industry
The Holz 320 Expansion Joint applies the technology of the tire industry to the hand built pressure piping expansion joint. The use of polyester tire cord and the modified arch construction provides greater overall performance than previous designs.
The superior performance offered by the 320 Expansion Joint is the result of a three-year development program that thoroughly re-engineered the handbuilt expansion joint. This program studied the relationship between the pressure capability of the expansion joint and the media temperature. Holz Rubber engineers also studied concurrent movements and spring rates. As a result, Holz can now provide expansion joint application guidelines which were previously unknown in the industry.
The superior performance of the Series 320 Expansion Joint is the result of 3 years of development.
The most complete line of rubber expansion joints is available including The SF 1000 expansion joints. The SF 1000 rubber joints are available from stock in various elastomers and in sizes of 2" ID to 12" ID. The joints have operating pressures to 227 psi and temperature ratings to 300° F.
The SF 1000 Expansion Joint is available in sizes of 2" ID to 12" ID with operating pressures to 227 psi and temperature rating to 300o F.
SF 1000 APPLICATIONS
Holz Rubber Company Expansion Joints
provide low-cost, effective solutions for a broad range of industries.
Heating, Ventilation and Air Conditioning
• Used to isolate the mechanical noises and vibration resulting from pumps, compressors and chillers found in; apartments, hotels, hospitals, airports, commercial and institutional buildings and aboard ships.
Chemical and Industrial Process Piping Systems
• Controls motion, vibration and stress on process lines handling corrosive chemicals and abrasive slurries.
the single arch 320 can provide movement capability equal to the traditional double arch product and the double arch 320 movement capabilities are equal to those of the standard quadruple arch product. The Holz Rubber 320 Expansion Joint can solve piping movement problems without having to resort to long and expensive multi-arch products. These movements are unmatched in the industry and enable Holz to provide an expansion joint that will satisfy a wide range of needs.
ACR manufactures and supplies expansion joints for connecting diffeent sized piping.
